Titanium Grade 2 (Commercially Pure)

 

Grade 2 Titanium is a commercially pure (CP) grade of titanium and is the most commonly specified grade of CP titanium. It has good ductility and formability with excellent corrosion resistance, especially to seawater.

 

Dimensional

Thickness	Maximum Width
0.02-  0.1mm	320mm as rolled edge 300mm with a slit edge

 

Typical Mechanical Properties (Annealed)

 

UTS (MPa)	YS (MPa)
485	345

 

Physical Properties

 

Density*	4.48 g/cm3
Beta Transus	915°C
Melting (liquidus) Point	1668°C
Thermal Conductivity*	21.79 W m-1 K-1
Electrical Resistivity*	0.53 μΩ•m
Magnetic Permeability	Nonmagnetic
Young’s Modulus	116 GPa
Shear Modulus	44 GPa
Poisson’s Ratio	0.32

* Typical values at room temperature of about 20 to 25°C (68 to 78°F)

 

Typical application

   Aerospace structures (skins) & aircraft engine parts

   E-Beam equipment used for food sterilization and vulcanizing rubber

   Reactor vessels

   Speaker domes

   Medical implants and devices

 

Size

Available in thicknesses and widths per table.

Temper

Available in the annealed or as rolled condition.

Surface

Clean uniform surface, 1Ra - 16Ra without discoloration or surface defects. Available with a slit edge (typical burr <10% of strip thickness) or with an as-rolled edge.

Packing

Properly packaged to avoid damage in transit. International packaging available upon request.

Conformance

ASTM B265, ASTM F67, AMS4902,

DFARS Compliant.