Hastelloy C276

Hastelloy C-276 (UNS N10276/W.Nr. 2.4819) is known for its corrosion resistance in a wide range of aggressive media. The alloy is resistant to pitting, crevice corrosion, and stress corrosion cracking. It can be hardened only by cold-working and can operate from cryogenic temperatures up to 400°C.

Dimensional

Thickness	Maximum Width
0.1 to 2.0mm	450mm as rolled edge 400mm with a slit edge

Typical Mechanical Properties (Annealed)

UTS (MPa)	YS (MPa)
552-758	205-310

Physical Properties

Density

8.89 g/cm3

Melting (liquidus) Point

830-1100°C

Coefficient of Expansion

12.2 µm/m-°C

Thermal Conductivity

9.8 W/m.K

Electrical Resistivity

130 µΩ.cm

Young’s Modulus

205 GPa

Shear Modulus

79 GPa

Poisson’s Ratio

Typically, 0.33

* Typical values at room temperature of about 20 to 25°C

Typical applications

Springs, heat exchangers bellows and seals.

It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment and the recovery of “sour” natural gas. Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack-gas re-eaters, fans and fan housings. In chemical processing, the alloy is used for components including heat exchangers, reaction vessels, evaporators and transfer piping.

Size

Available in thicknesses and widths per table.

Temper

Available in the annealed or as rolled condition.

Surface

Clean uniform surface, 1Ra - 16Ra without discoloration or surface defects. Available with a slit edge (typical burr <10% of strip thickness) or an as-rolled edge.

Packing

Properly packaged to avoid damage in transit. International packaging available upon request.

Conformance

ASTM B575, ASTM B906.

À propos de nous

Produits

Contact