Monel 400
Monel 400 is a solid-solution alloy that can be hardened only by cold working. It has high
strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.
It’s widely used in many fields, especially marine and chemical processing. Typical applications electrical and electronic components; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels; boiler feedwater heaters and other heat exchangers.
Dimensional
| Thickness | Maximum Width |
| 0.03 to 2.0mm | 450mm as rolled edge 400mm with a slit edge |
Mechanical Properties (Annealed)
| UTS (MPa) | YS (MPa) |
| 482-586 | 172-310 |
Physical Properties
| Density | 8.84 g/cm3 | |
| Melting Point | 1300-1350°C | |
| Coefficient of thermal expansion Expansion (i) | 13.9-14.1x10-6 k-1 | |
| Thermal Conductivity | 21.7 W m⁻¹ K⁻¹ | |
| Electrical Resistivity | 0.51 μΩ•m | |
| Modulus of elasticity |
|
* Typical values at room temperature of about 20 to 25°C
Typical applications
marine engineering, chemical processing, and nuclear systems, where foils are required for sealing, shielding, and flexible component integration. Specific uses include its role in micro-welding applications for electronic and sensor technologies, thermal management solutions, and precision chemical-resistant linings.
Size
Available in thicknesses and widths per table.
Temper
Available in the annealed or as rolled condition.
Surface
Clean uniform surface, 1Ra - 16Ra without discoloration or surface defects. Available with a slit edge (typical burr <10% of strip thickness) or an as-rolled edge.
Packing
Properly packaged to avoid damage in transit. International packaging available upon request.
Conformance
ASTM B127, AMS 4544.
