Inconel 600
Inconel 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.
The alloy is highly resistant to chloride-ion stress-corrosion cracking due to the high nickel content, and can be hardened and strengthened through cold work only. The versatility of Inconel 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 1095°C.
Dimensional
| Thickness | Maximum Width |
| 0.1 to 2.0mm | 450mm as rolled edge 400mm with a slit edge |
Typical Mechanical Properties (Annealed)
| UTS (MPa) | YS (MPa) |
| 552-758 | 205-310 |
Physical Properties
| Density | 8.47 g/cm3 | |
| Melting (liquidus) Point | 1354-1413°C | |
| Coefficient of Expansion | 14.2 µm/m-°C | |
| Thermal Conductivity | 14.9 W/m.K | |
| Electrical Resistivity | 103 µΩ.cm | |
| Young’s Modulus |
| |
| Shear Modulus | 80.8 GPa | |
| Poisson’s Ratio | Typically, 0.324 |
* Typical values at room temperature of about 20 to 25°C
Typical application
gas turbine blades, seals, and combustors, in addition to turbocharger blades and seals, electric completely submersible well pumps, electric motor shafts, high temperature bolts, chemical processing, pressure vessels, warmth exchanger tubes, vapor generators and core parts in nuclear pressurized water activators.
Size
Available in thicknesses and widths per table.
Temper
Available in the annealed or as rolled condition.
Surface
Clean uniform surface, 1Ra - 16Ra without discoloration or surface defects. Available with a slit edge (typical burr <10% of strip thickness) or an as-rolled edge.
Packing
Properly packaged to avoid damage in transit. International packaging available upon request.
Conformance
ASTM B168, AMS 5540.
